| ||
|
 |
|
|
|
|
|
|
|
|
| Dwyer 0-1.0 H2O Magnehelic Differential Pr Gauge |
Dwyer-2001 |
61.60 |
|||
| Dwyer 0-25 H2O Magnehelic Differential Pr Gauge |
DWYER-2000-00 |
70.80 |
|||
| Dwyer 0-25 H2O Magnehelic Differential Pr Gauge |
Dwyer-2025 |
61.60 |
|||
| Dwyer 0-15 H2O Magnehelic Differential Pr Gauge |
Dwyer-2015 |
61.60 |
|||
| Dwyer 0-20 H2O Magnehelic Differential Pr Gauge |
Dwyer-2020 |
61.60 |
|||
| Dwyer 0-50 H2O Magnehelic Differential Pr Gauge |
Dwyer-2050 |
61.60 |
|||
| Dwyer 0-30 H2O Magnehelic Differential Pr Gauge |
Dwyer-2030 |
61.60 |
|||
| Dwyer 0-40 H2O Magnehelic Differential Pr Gauge |
Dwyer-2040 |
61.60 |
|||
| Dwyer 0-60 H2O Magnehelic Differential Pr Gauge |
Dwyer-2060 |
61.60 |
|||
| Dwyer 0-10 H2O Magnehelic Differential Pr Gauge |
Dwyer-2010 |
61.60 |
|||
| Dwyer 0-6.0 H2O Magnehelic Differential Pr Gauge |
Dwyer-2006 |
61.60 |
|||
| Dwyer 0-5.0 H2O Magnehelic Differential Pr Gauge |
Dwyer-2005 |
61.60 |
|||
| Dwyer 0-3.0 H2O Magnehelic Differential Pr Gauge |
Dwyer-2003 |
61.60 |
|||
| Dwyer 0-80 H2O Magnehelic Differential Pr Gauge |
Dwyer-2080 |
61.60 |
|||
| Dwyer0-4.0 H2O Magnehelic Differential Pr Gauge |
Dwyer-2004 |
61.60 |
|
|
|
| Page 1 of 7 |
  
|
|
|
|
Dwyer-2001
Dwyer 0-1.0 H2O Magnehelic Differential Pr Gauge
|
|
|
|
|
|
Ambient temperature range: 20? to 140?F.* (-7? to 140?C) Rated total pressure: -20\" Hg. to 15 psig.† (-68kPa to 103 kPa)Overpressure: Relief plug opens at approximately 25 psig (172 kPa)Connections: 1/8\"\' NPT female high and low pressure taps duplicated - one pair side and one pair back. Housing: Die cast aluminum. Case and aluminum parts Iridite-dipped to withstand 168 hour salt spray test. Exterior finish is baked dark gray hammerloid. Accuracy: Plus or minus 2% of full scale (3% on - 0 and 4% on - 00 ranges), throughout range at 70?F. (21?C) Standard accessories: Two 1/8\" NPT plugs for duplicate pressure taps, two 1/8\" pipe thread to rubber tubing adapter and three flush mounting adapters with screws. (Mounting and snap ring retainer substituted for 3 adapters in MP & HP gage accessories.) Weight: 1 lb. 2 oz. (460 g) * Low temperature models available as special option. † For applications with high cycle rate within gage total pressure rating next higher rating is recommended. |
| Price: $61.60 | |
|
|||||||||||||
